Customization: | Available |
---|---|
After-sales Service: | 1year Except for Fast-Wearing Parts |
Warranty: | 1year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
No |
Item |
Unit |
HGLG-18-GLS Parameters |
1 | OD of mother tube |
mm | ≤φ25.4 |
2 | Thickness of mother tube |
mm | 1~5 |
3 | Length of mother tube |
m | 2~6 |
4 | Diameter tolerance of mother tube |
% | ±1.0 |
5 | Thickness tolerance of mother tube |
% | ±7.5 |
6 | Straightness tolerance of mother tubes |
mm/m | ≤1.0; however the blank must in any case pass freely over the mandrel rod |
7 | OD of finished tube |
mm | φ6~φ18 |
8 | Thickness of finished tube |
mm | 0.35~4.5 |
9 | Max length of tube rolled |
m | ~20 |
10 | tube length after cutting |
m | 2~5 |
1 | Diameter tolerance of tube |
% | ±0.5 |
12 | Thickness tolerance of tube |
% | ±5 |
13 | Ra Surface roughness of tube |
μm | 0.4~0.8 |
14 | Tube material |
Zi alloys |
|
15 | Max rolling force |
KN | 150 |
16 | Coefficient of elongation |
≤3.5 | |
17 | Rolling speed |
/ Strokes/min |
100~250 ( 300 Design at 300) |
18 | Feed range |
mm/stroke | 0.5~5() Infinite variable |
19 | Turning angle of tube |
degree |
<90 In one complete stroke |
20 |
Structure form of feeding and turning device |
-, AC servo motor -Worm gear drive | |
21 | Mode of feeding and turning |
, Double-feed, double-turn |
|
22 | Operation mode |
End loading needn't stop |
|
23 | Structure of roll housing |
Closed roll housing |
|
24 |
Drive mode of roll housing |
-,Single crank-connecting rod drive with double sector block balance system |
|
No |
Item |
Unit |
HGLG-18-GLS Parameters |
1 | Crank radius | mm | ~190 |
2 | Connecting Rod Length |
mm | ~2050 |
3 |
Deviation between crank central line & connecting rod central line on housing |
mm |
~180 |
4 | Stroke length | mm | ~380 |
5 | Modulus of synchronizing gear | mm | 3 |
6 | Roll diameter | mm | ~Φ130 |
7 | Main motor power | KW | 55(AC) |
8 | Feeding servo motor | KW | ~2*18.8(90 Nm) |
9 | Turning servo motor | KW | ~5*18.8(90 Nm) |
10 | Installed capacity | KW | ~250 |
11 | Equipment lubrication flow |
L/min | 40 |
12 |
Technological lubrication station flow |
L/min |
200 |
13 | Hydraulic station flow |
L/min | 63 |
14 | Cooling water consumption |
m3/h | ~20(0.3~0.5MPa) ≤35 ºC) |
15 | Compressed air consumption |
m3/h | 10(0.5~0.7MPa) |
16 | The total weight of mill |
t | ~45 |
17 | Mill orientation |
At User's option | |
18 | Rolling line height |
mm | 800 |
19 | Rolling mill area | m | ~56×5.4 |
Yantai Haige International Trading Co.,Ltd., is a joint-stock enterprise engaged in exporting niche mechanical equipments produced in China to the markets abroad, which is located in Laishan district, Yantai City, Shandong Province, China.
The company is based on the manufacturing plant---Yantai Haige machine tools Co.,Ltd whose area is more than 2000m². There are one hundred and forty staffs working in the factory. The factory is mainly engaged in producing and selling peeling machines(centerless lathes), straightening machines, polishing machines(abrasive belt machines), auxiliary machines and other processing and finishing equipment for steel(bright steel) for more than ten years.
We are professional manufacturer and we have more than 10 years experience in this field.We have our own factory.
Besides,at the end of 2014,we was just estabilished a trading company.
2.How many employees are there in your factory?
Approximately 150 persons.
3.Do you have your own R&D team?How many design engineers do you have?
Yes,we have our own R&D team.More than 10 persons.
4.Which countries have your machines been exported to now?
Russia,South Korea,North Korea,Pakistan,India,Vietnam,Taiwan,etc.
We regard our customer's satisfaction as our unremitting pursuit.