10JY130 Large Multi-Column Type Customized with Multi-Roll 11 Roll Straightening Machine

• Customization: Available
• After-sales Service: Engineers Can Offer Overseas Service
• Type: Balance Roller Straightening Machine
• Model NO.: 10JY130
• Usage: Sheet, Wire, Pipe, H Beam Flange, Bar, Tube
• Voltage: 380V
• Automatic Grade: Semiautomatic
• Principle: Small Deformation
• Certification: ISO9001, CE
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Diameter Range (mm): 35-130
• Roll Quantities(Nos.): 10+1
• Roll Diameter(mm): 420*550
• Total Capacity(Kw): 460
• Transport Package: Wooden Cases as Outer Packaging
• Trademark: haige
• Origin: China
• HS Code: 8462291000
• Production Capacity: 50 Set Per Year

Product Description

Large Multi-Column Type Customized Eleven-roll bar straightening machines
 

Product Description

The vertical eleven-roll straightening machine has some features comparing with the two-roll and the conventional six-roll (seven-roll) straightening machine, that is : the contact line is longer, the straightening pressure is smaller, the bending is not tense, and the deformation length is longer. These are all due to the  advantages of large spacing between the three-four-five-rolls, The extrusion to the surface of the material is greatly reduced. The extrusion deformation of the material surface, especially the tube, is greatly reduced while ensuring the straightening effect.

Technical Parameters

Specification		10JY130
Input material	Diameter range (mm)	Φ35~Φ130
	Length range(mm)	Tensile strength σb≤600(Mpa)	Φ35≤d≤Φ130(L ≥3000)
		Tensile strength σb≤1200(Mpa)	Φ35≤d≤Φ100(L ≥3000)
	Surface hardness	≤HB380 (≤HRC42)
	Straightness(mm/m)	black bar≤10
	Diameter tolerance	black bar:d-2-GB/T702-2004
	Roundness	d≤50	≤50% of dia tolerance
		50<d≤80	≤65% of dia tolerance
		d>80	≤70% of dia tolerance
	Surface roughness (Ra)	Improved (compared with the black bar)
After straightening	Straightness(mm/m)	black bar≤1.0
	Method of measurement	Feeler gauge
	Diameter tolerance	Improved (compared with the black bar)
	Surface roughness (Ra)	Improved (compared with the black bar)
Roll quantities(nos.)		10+1
Roll diameter(mm)		Φ420*550
Feeding speed (m/min) - stepless speed		10-30 (bars with high strength, high hardness, large diameter or small diameter, large roundness, and large original straightness must reduce speed)
Main Motor Power (kw)		200 x 2nos.
Weight (t)		Host 150
Total Capacity(kw)		460 (approxi.)
Compressed Air Source(prepared by user)		0.5~0.8MPa,1.8m^3/min,0.8 m^3up air tank with two stage oil water separator and compressed air freezing type drying machine

Company introduction

Yantai Haige International Trading Co.,Ltd., is a joint-stock enterprise engaged in exporting niche mechanical equipments produced in China to the markets abroad, which is located in Laishan district, Yantai City, Shandong Province, China.

The company is based on the manufacturing plant---Yantai Haige machine tools Co.,Ltd whose area is more than 2000m². There are one hundred and forty staffs working in the factory. The factory is mainly engaged in producing and selling peeling machines(centerless lathes), straightening machines, polishing machines(abrasive belt machines), auxiliary machines and other processing and finishing equipment for steel(bright steel) for more than ten years. 



Packaging & Shipping

We have much experience in exporting transportation packaging. Taking multi protection measures:

The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.

Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.

Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.

Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.

Certification


FAQ

1.Are you manufacturer or trading company?

We are professional manufacturer and we have more than 10 years experience in this field.We have our own factory.Besides,at the end of 2014,we was just estabilished a trading company.

2.How many employees are there in your factory?

Approximately 150 persons.

3.Do you have your own R&D team?How many design engineers do you have?

Yes,we have our own R&D team.More than 10 persons.

4.Which countries have your machines been exported to now?

Russia,South Korea,North KOrea,Pakistan,India,Vietnam,Taiwan,etc.

We regard our customer's satisfaction as our unremitting pursuit.