| Customization: | Available |
|---|---|
| After-sales Service: | 1year Except for Fast-Wearing Parts |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Name | LZ3/560 straight type wire drawing machine |
Block diameter | 560mm |
Drawing time | 3 |
Inlet diameter | Φ6.5 mm |
Outlet diameter | Φ4.0 mm-Φ5.5mm |
Inlet wire strength | ≤800mpa |
Total reudction rate | 62.13% |
Average reduction rate | 27.65% |
Max wire speed | 330m/min |
Motor power | 30 kw, variable frequency motor |
Die's size | Φ40mm×25 |
Layout form of drum | Vertical inclined drum |
Direction of inlet wire | From left to right |
Method of wire setting-out | Enter the machine for drawing the wire line after pre-treatment (shelling). |
Take-up method | Spool type wire winding machine |
Wire wheel, well roller | The turning part which is touched with wire directly like well roller, the surface is coating with tungsten, HRC57-63. |
Die box | 1.Contain powder and water cooling two parts. 2.The first drum use auto rotate stir die box, the second and third use stir die box. Use totate stir dix box can make the drawing powder lubricate the wire more efficient and averagely, so it will help to decrease the die's loss and increase the wire surface's quality, auto stir the drawing powder can reduce operator's workload. 3.The wire drawing die in the die box is forced to be cooled by direct water inlet and outlet to ensure that the die works at normal temperature, thus improving the service life of the die and ensuring the quality of the wire. |
Wire drawing drum material | 560mm.1.Cast steel ZG45,resurfacing welding, tungsten coating and surfacing 0.5mm thickness, HRC57-63. Roughness is less than 0.8umm 2.Inside the drum, anticorrosive treatment of zinc lithium alloy. |
Drum cooling | Drum inside cooling: drum's inner wall has 3 water channels which displayed in 120 degrees direction by water spraying. Drum external cooling: the ventilation pipe below the outside of the drum uses 360 degrees of forced air cooling on the surface of the drum and wire to lower the surface temperature of the reel below 80 degrees |
Tension machine | Built-in type |
){kind=link}