| After-sales Service: | Online Technical Support |
|---|---|
| Warranty: | 1 Year |
| Workpiece: | Round Steel Bar |
| Process Range: | 20-80mm |
| Material: | Various Metal Bars |
| Accuracy: | Tolerance H9 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Yantai Haige Machine Tools Co., Ltd. now is China's largest bright bar processing equipment manufacturer. And has more than 10 years experience in this field.
We have our own R & D team, so that we can provide comprehensive technical guidance and support. Also, we can costomized as according to customer's requirements.
We have our own machining center, so that we can well control the quality of the products.
Product Description
Series WXC Peeling machine is a high-efficiency lathe which is specialized in processing the surface of steel round bar and steel wire rod, for example, straightening, peeling, cutting and polishing, etc.
Not only quickly remove surface hardened layer, cracks and other defects, but also can get high precision.
During processing, the bar doesn't rotate itself. The cutting tools rotates at high speed to peel the surface of the bar. At the same time, after peeled , the bar keeps walking forward.
Shapes of Workpiece are requested long steel round bar and steel wire rod.
Advantages
Compared with ordinary lathe / universal lathe
1. When processing over-length bar, peeling machine has incomparable advantages.
Univeral lathe is good at processing short bar. But there is great restriction for processing long bar.
In theory, peeling machine can process the bar of infinite length.
2. Peeling machine is not only processing round bar, but also can process steel wire / coil. Including from wire rod to wire rod and from wire rod to bar. That's the ordinary lathe can't do it.
3. Processing speed can reach up to 1~12m/min, the working efficiency of peeling machine is dozens of times of the ordinary lathe.
4. High precision, after peeled, tolerance of diameter can reach≤h11~h9, surface roughness Ra≤3.2μm. After straightened, Ra≤1μm.
Technology
Pre-straightening--- Peeling / Turning --- Precision Straightening --- Polishing--- Cutting
Main Technical Parameters
| Model | WXC100CA | |
| Raw Material | Diameter Range (mm) | Φ25~Φ100 |
| Length range (mm) | 3000-6000mm | |
| Tensile Strengthσb(Mpa) | ≤1100 | |
| Surface Hardness | ≤HRC30 | |
| Curvature(mm/m) | ≤1.50 | |
| Diameter Tolerance | According to GB 702-2004 second group | |
| Roundness | ≤50% of diameter tolerance | |
| Surface Roughness(Ra) | ≤25~50mm | |
| Finished Goods | Diameter Range(mm) | Φ25~Φ97 |
| Diameter Cutting Depth(mm) | 0.5~3.0 | |
| Diameter Tolerance | h10 | |
| Surface Roughness(Ra) | ≤6.3μm | |
| Roundness(mm) | ≤0.03 | |
| Feeding Speed(CVT m/min) | 1.0~8.0(high working speed,continuous chip,more harder materials,and deeper cutting depth,the speed must be slowed down) | |
| Cutter Head Rotating Speed(CVT)(r/min) | 400-1000 | |
| Main Motor Power(kw) | 75 | |
| Feeding Motor Power(kw) | 11 | |
| Total Capacity(kw) | 95(approxi.) | |
| Voltage(V) | 415 | |
| Frequency(HZ) | 50HZ±2% | |
| Compressed Air Source(prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
More information, please contact me
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}